A123 Battery 4S1P 13.2V 2300mAH

 
 A123 Battery 4S1P  13.2V  2300mAH
 
Charging  connector is JST-XH  connector
Discharging connector is female Deans Ultra plug.
Discharging wires are AWG14 silicon wires
We can also provide AWG12 and AWG10 wires for higher current
 
Pack Configuration: 4S1P
Nominal pack voltage: 13.2V (3.3V per cell)
Nominal pack capacity: 2300MAH
Fully-charged pack voltage: 14.4V (3.6V per cell)
Recommended cut-off voltage: 10.0V (2.5V per cell)
Minimum voltage: 8.0V (2.0V per cell)
Weight:340g

Continuous Discharge (C): 30.0C
Continuous Current (A): 69.0A
Burst Discharge (C): 60.0C
Burst Current (A): 138.0A
Maximum Charge Rate (C): 4.0C
Maximum Charge Rate (A): 10.0A

All of our A123 packs are produced using new genuine A123 Systems ANR26650M1 and APR18650M1A cells with a nominal voltage of 3.3V.

Leave a message for product

Title

Contact

Tel

Content

Verify Code

Click to change

Note：1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!